FiveseveNForum.com

YES I will be selling them. They cost alot more then what the REM illuminated version will cost so it will be an option.

Price points I am shootin for,

$300.oo for the Green Dot Fiber Optic with REM already installed


$500.oo for these. FYI Importation costs are high so are international bank transaction fees so the 500 is on the LOW SIDE.

I will also be bringing in the USG Black ring sight recital version with the same internal from the factory illumination.

WHAT IS THAT SEXY THING

Green Fiber Optic ring sight with factory installed illumination.


Think internal REM if Chris had a 50 grand or so sitting around for R&D and another 50 grand to setup manufacturing.


FYI these bodies are Aluminum not polymer like the factory non illuminated sights.

Hmm just what I've been looking for. Something factory/internal, no modification required..

Friggin pricey though, and that's before importation costs.

They look damn good!

When it comes to 5.7x28mm or 10mm

Regular cost-factor analysis doth not apply.

Jay, not to (but to) hijack your thread, guess what just touched my hands and I have in my possession....

It begins with

Tanfoglio Stock 3 10mm

And ends with a lot of happy things.

blueorison wrote:When it comes to 5.7x28mm or 10mm

Regular cost-factor analysis doth not apply.

Jay, not to (but to) hijack your thread, guess what just touched my hands and I have in my possession....

It begins with

Tanfoglio Stock 3 10mm

And ends with a lot of happy things.

An Italian girl, careful they can be feisty.

panzermk2 wrote:YES I will be selling them. They cost alot more then what the REM illuminated version will cost so it will be an option.

Price points I am shootin for,

$300.oo for the Green Dot Fiber Optic with REM already installed


$500.oo for these. FYI Importation costs are high so are international bank transaction fees so the 500 is on the LOW SIDE.

I will also be bringing in the USG Black ring sight recital version with the same internal from the factory illumination.

Looks like Ring Sight is finally figuring out what people want. An ambient light sight with a battery back-up an body made of metal. pretty expensive though. Now if they made the Black Ring Sight with internal battery/LED for the same price... THAT would be a home run!
It's very economical to get the GD sight with the REM already attached.


Easier to operate the Rheostat. :agree:

In the words of those India guys who pretend to be from Microsoft "OHH My god!"

Green Fiber Optic Internal Illumination.

Elite Ammunition PS90 USSG Secret Service Optic Internally Illuminated.

That's sweet looking. Too bad my REM is hard to beat. :laugh:
How is it without batteries though? Is there still an aiming reticle?
One problem I have had with my REM is batteries dying when I try to show it off :wall:

DO YOU EVEN OPERATOR BRO

Rapier1772 wrote:That's sweet looking. Too bad my REM is hard to beat. :laugh:
How is it without batteries though? Is there still an aiming reticle?
One problem I have had with my REM is batteries dying when I try to show it off :wall:

You see the standard retcle.

i have to check the specs.

:clap: They look awesome! What is the price of the USSG illuminated sight going for?
Do you have pictures of the Standard Green Dot model with the REM T3GD attached?
You did receive the last two I sent you right?

Great news! I just picked up a PS90 with only the rail and have been very frustrated by FN discontinuing the sights in the US. I'm going to spend $300-$500 anyway on any optic system that will work so I suppose I can wait a little longer.

Any timeframe for these going on sale?
Thanks :thumb:

M1P90 wrote::clap: They look awesome! What is the price of the USSG illuminated sight going for?
Do you have pictures of the Standard Green Dot model with the REM T3GD attached?
You did receive the last two I sent you right?

Today, the ringsights came in yesterday / Monday which by default is the craziest busiest day for me.

Rockslope wrote:Great news! I just picked up a PS90 with only the rail and have been very frustrated by FN discontinuing the sights in the US. I'm going to spend $300-$500 anyway on any optic system that will work so I suppose I can wait a little longer.

Any timeframe for these going on sale?
Thanks :thumb:

Good optics aren't cheap. You can tell these where manufactures for the Military market not the civilian "included" optic.

In a few weeks. I am waiting on mounting hardware.

Elite Ammunition Green Fiber Optic with REM Illumination Module Variant.

:thumb: I'd like to point out that the wire that comes out of the Rheostat has a metal wire in it so it can be bent down and it will stay down so it won't get snagged on anything. I make them a little long for easier installation. Just bend it down along the side of the Ring Sight and your good to go.

Sorry about that and I should have known better. The wire on my REM white ring sight is routed correctly.

I will take more pics with it correctly installed. Rushing to much to so I can get out of town to a meeting.

One a side not, got that damn dot to show nicely!!!!!!

is that all the green fiber optic is ? The dot?

Buffman wrote:is that all the green fiber optic is ? The dot?

Yes on both. The internal and REM units both tap into and add light to the fiber optic rod.

There are white rings akin to the first gen white ringsight.

I will try to get better pics of the USSG retical both lit and in it's natural black state.

This is the normal sight picture with plenty of ambient light. The white ghost ring and T are powered by a front Light collector and disappear in dim light. The Green Dot is powered by a top light collector/fiber optic.


This is what it looks like in low light looking out a window.


See more pics here. http://www.fivesevenforum.com/viewtopic ... 12&t=11423" onclick="window.open(this.href);return false;

I'm definitely in for one of these ring sights!!

count me in on the green site.also sent you an email.

dave

Yep waiting on more of the windage and elevations screws.

Are the screws different from the ones that mount the rail that are coming with them now?

ak_nut wrote:Are the screws different from the ones that mount the rail that are coming with them now?

No but the rail only uses one of them for windage. Some folks have older worn out poly ringsights. They would have to full sets as take off.

To avoid any issues and to make it easier to swap we are including full mounting hardware. The high end internally illuminated sights will come with our EA sight adjusting tool.

Makes sense

anxiously waiting!!!
bump..lol

Are these the same as the ones in this link?http://www.ar15.com/forums/t_6_24/44210 ... tml&page=1 And are they the same as the one currently listed for sale on the EA page?

No the ones we have listed is the other version.


Same Aluminum body, but with white recitals green dot, with green fiber optic collector on top for daylight and internal illumination for night time and low light.

Thanks for the reply. Any ETA on when the one I linked will be for sale?

The version Buffman was referring to is this version.

USSG Black reticle, Aluminum body, internal illumination.

We will have this version up in a few weeks.

Thanks again. Credit Card at the ready for when they are for sale.

panzermk2 wrote:The version Buffman was referring to is this version.

USSG Black reticle, Aluminum body, internal illumination.

We will have this version up in a few weeks.

Jay, any updates?

Thanks

Soon keep in mind Lisa just had to rebuild our website form scratch.

Thanks Jay. In no rush, was just curious.

Options for the Tri Rail PS90 coming soon.

:thumb: Nice to see that you have the Polymer Green Dot Fiber Optic WITH the REM T3GD attached up on your website! Looks good and at a good price! http://www.eliteammunition.com/p90ps90. ... y=13357873" onclick="window.open(this.href);return false;

I see you have 5 in stock. If you need more T3GDs I will try and put 4 or 5 together for you.
I am still waiting on my Molds to come in. Hopefully another 30 days or so. Crossing my fingers.

Did you see Ringsight's announcement about us?

panzermk2 wrote:Did you see Ringsight's announcement about us?

No. Can you show me the link?

M1P90 wrote:

panzermk2 wrote:Did you see Ringsight's announcement about us?

No. Can you show me the link?

Right on their homepage.



http://www.ringsights.com/" onclick="window.open(this.href);return false;

:clap: Awesome! Your sales should increase dramatically! Congrats!!

M1P90 wrote::clap: Awesome! Your sales should increase dramatically! Congrats!!

Not just mine, our last restock order had the Polymer units included for your REM units.