FiveseveNForum.com

EA USSG Internal Illumination PS90 Sight Picatinny Version
Ring Sight Based Picatinny Version for Standard rifle applications.




Included with each Ring Sight:
Custom Black EA Ring Sight Adjustment Tool w/Allen Key
Complete Mounting Hardware
Spare Lithium Battery
The MC-10-80 is specifically designed for the FN Herstal P90. The sight is a unit power telescopic sight with a black graticule for day use and green illumination reticle for night use. Being NVG compatible it is ideally suited to 24 hour operations.

Aiming is instinctive and target acquisition instantaneous. The P90 is fitted with an integral optical sight without magnification, for improved sighting and quicker acquisition of the target. Performance is fully retained in low light conditions.
In the P90 the solid glass optic is potted into a plastic housing designed as part of the weapon interfacing with it through two zeroing screws for elevation and windage. The sight withstands the NATO drop test by dropping the gun onto concrete, sight down, from 1.5 metres without damage to the sight.
The sight has a 10mm aperture and two graticule patterns. Small and large rings lit by light from the target for day use and, for low light, an open T lit by a red gtls enhanced by light from the sky. The open T can be used with the naked eye or for shooting with Night Vision Goggles.
The gtls can be replaced by an armourer when necessary, using a knife with advice from Ring Sights technical department. This is the only maintenance required.
Features + Benefits
Day and night use. Black Ring and spot for day use and a green illuminated reticle for night use.
NVG compatible.
User able to keep both eyes open when aiming.
Available for every type of rifle.
Small and robust.
No misting.
Soild Glass optic.
Specification
Internal LED 5 Intensity Levels
Auto Off After 2 hours of inactivity
Operational Temputure -40F to 131F
Sight Length (mm)
130
Sight Width (mm)
21
Sight Height (mm)
43
Sight Weight (Kg)
0.17
Aperture (mm)
10
Optic Length (mm)
80
Optic Width (mm)
10
Optic Height (mm)
20
Field Of View (Mils)
60
Magnification
x 1
Parallax
Neg
Graticule
Dual

How long does the battery last in these?

Since they auto turn off after 2 hours, years.

Are these still available?

Satan wrote: ↑

11 Feb 2018, 20:58

Are these still available?

Always, just pre order since these are custom made in the UK. We just received a re-stock order and even though we had more than double ordered all but where spoken for by the time Ringsights shipped. This last shipment too less than a month and a half to arrive, no US customs delay.
Another review of this sight will be up coming.

panzermk2 wrote: ↑

12 Feb 2018, 05:51

Satan wrote: ↑

11 Feb 2018, 20:58

Are these still available?

Always, just pre order since these are custom made in the UK. We just received a re-stock order and even though we had more than double ordered all but where spoken for by the time Ringsights shipped. This last shipment too less than a month and a half to arrive, no US customs delay.
Another review of this sight will be up coming.

If I ordered one today, which I did, how long is the waiting list? Is the batch that I have quoted spoken for? EA USSG, MC-10-80 Black Reticule, Internal Illumination PS90 Sight. not Picatinny Version.

Thanks

Yes they have been, we always order extra but another Dept. purchase cleared us out of any extra. We have more on order.

panzermk2 wrote: ↑

21 Feb 2018, 06:41

Yes they have been, we always order extra but another Dept. purchase cleared us out of any extra. We have more on order.

Any rough estimate on time? A few weeks or a couple of months? A year or two? LOL Just a rough guess.

.,

it can be a month or 3 months. A few shipments back the USDA help them in customs for 3 months, no explanation to us as to why, and then they showed up here.

Thank you for the reply. Three months is ok with me. I am just glad it's not 2 years. LOL

panzermk2 wrote: ↑

22 Feb 2018, 12:22

it can be a month or 3 months. A few shipments back the USDA help them in customs for 3 months, no explanation to us as to why, and then they showed up here.

Well, It is coming up on the 4 month mark after I ordered. I am not in a huge rush or anything, just wondering if there are any updates.

Thanks.

We called them yesterday and left a VM for an update. You happened to place your order right after our last shipment.

panzermk2 wrote: ↑

14 Jun 2018, 05:59

We called them yesterday and left a VM for an update. You happened to place your order right after our last shipment.

I figured as much. No big deal. Just looking forward to getting the sight.

It's been another month, any news?

I am waiting on shipping confirmation right now.

panzermk2 wrote: ↑

16 Jul 2018, 13:04

I am waiting on shipping confirmation right now.

I am really not trying to sound impatient, but we are coming up on 7 months of a 4 month wait. Any news? I am beginning to think my name might have been dropped from the waiting list.

.,

Nope like I said in the email. Ringsight finally shipped our order a few weeks ago and it's sitting in US customs right now waiting to be cleared.

panzermk2 wrote: ↑

17 Sep 2018, 11:12

Nope like I said in the email. Ringsight finally shipped our order a few weeks ago and it's sitting in US customs right now waiting to be cleared.

It's not a problem. I figured because it's been another couple of months, it wasn't unreasonable to ask.

Also, I never received an email from anyone about this.

.,

No worries, might explain why you haven't heard anything.

Got my new Ring Sight model MC-10-80 from Elite Ammunition today. It is fantastic! Well worth the wait! This is the sight that was literally made to be on this firearm. It just looks right. Couple of install tips. 1. Make sure the battery is fully seated inside the battery compartment or the screw cap is a little tricky to get back on. Just give it a slight press. This may be obvious to most but it took me a bit to figure out. 2. The factory rail screws are very tight. I figure they are held in with some blue loctite or something. I used my wife's hair dryer (don't tell her! LOL) on high for a couple of minutes to get the rail good and hot. Make sure you pull the upper receiver out of the lower plastic stock before you do this. It may not hurt anything but I did not want to chance it. Once the rail is hot, the screws will back right out. Hope this helps folks.

Glad you liked it!


Yeah FNH like to torq the snot out of those screws.

Very nice.