FiveseveNForum.com

It is mostly Aluminum.

Anything new on this?

Testing a 3 inch barreled version.

panzermk2 wrote:Testing a 3 inch barreled version.

Great News. Any ETA, pictures, etc. ?

No ETA and no pics yet. Pistol is in the raw and not even fully finished externally.

I'd love to see an all metal variant. This round just screams for one.

Any word or info on the poly one?

FNGuy wrote:Any word or info on the poly one?

That one you want nothing to do with.

I won't name the company but sooner or later they will announce it and you will cringe at the thought of firing the 5.7 from one of their platforms.

http://www.excelarms.com/handguns.html" onclick="window.open(this.href);return false;

No the Excel is SS, part of the grip is only poly. The manfacturer making it like to make all poly junk.

I really hope ( http://atomitronx.com/products.html" onclick="window.open(this.href);return false; ) ( Fred Craig ) produces a barrel or the whole thing for our fav round. That Micro 22 is nice and comes with a 9mm barrel to swap out.

Just found this page, not sure if it's "RS7" is in production
RS7 Automatic Pistol "Slinger"
- http://forum.nationstates.net/viewtopic ... 6&t=181582" onclick="window.open(this.href);return false; - scroll down to the RS7

Image
Sub-Category: Automatic pistol
Sight: Fixed forward sight
Action: Gas powered
Gas Operation: Long stroke piston
Round: 5.7x28mm NATO
Magazine: 9 round handle-magazine, clip-fed
Stock: None
Barrel: 4.5 inch (115mm)
Firing Mechanism: Contemporary
Weight: 1.66 kilograms without magazine
Length: 11.8 inches
RPM: 350


The "Slinger" is one of the most modern fully-automatic pistols in the market. This weapon can shoot at a short range of 325 meters, but with exceptional force. Though the bullets are smaller caliber, they are propelled with good accuracy for an automatic pistol. The pistol can aslo shoot fairly fast, and holding the trigger down will provide continuous fire. We decided to increase the accuracy of this pistol further, and added a built-in sight to allow for maximum accuracy. In addition, this pistol features many different modes that can be switched to via the turn dial near the trigger. One mode is safety, and the others increase the velocity at which the bullet will leave the gun. In this automatic pistol, the gas chamber and piston are built-in under the barrel. Be warned though, higher settings cause a much larger recoil, and may damage the weapon if over-used. Overall, this weapon is light, fast, and a hard-hitter. An excellent firearm for an excellent customer.

Cost: 375 NSD

Video game guns, nice.

Just looking. Theres some good ideas out there, but Glock going 5.7? Kel-Tec? You intrigued me with your post so I'm scavenging the net looking through images and possibilities!

That NAYNAY site is out there, did they try and go sovereign or something? Cost is $375 NAYNAY dollars? Ha

If it was Glock the pistol would work.

It might just be me,

But for some reason, envisioning anything but the P90 and FsN shooting the 5.7x28mm in a semi-auto platform is REALLY hard to do.

I just can't see it. I know it's possible, but for so long the idea has been posterized on the FsN.

If it was a Glock, the grip would have to be long.

So glock is going to make a 5.7 handgun of there own or just like a conversion style kit for it?

No Glock is not making anything 5.7.

Good. The last thing we need is a 5.7 glock-nade. :p

Rapier1772 wrote:Good. The last thing we need is a 5.7 glock-nade. :p

AMEN!!

I guess Glock will offer a 5.7 immediately after they market a select-fire carbine. (
But, to quote panzer, if they build it, it will work (and, yes, THEY will come).

It might work but at the same time, I'd want to make sure their chambers are in spec.
Unlike their unsupported chambers which mean you have to buy after market barrels in order to safely reload the rounds.

SIG SAUER 5.7 ..... military only.

:ttiwwp:

JoJo wrote:SIG SAUER 5.7 ..... military only.

What SIG is making 5.7's now?

Don't start salivating yet, they're just speculating.

Keltec pos

I'd be happy with a FsN that's given a striker fired system like the FNS. That should allow a higher grip on the frame.

blueorison wrote:Keltec pos

I would not fire it......even with your hand!

JoJo wrote:

blueorison wrote:Keltec pos

I would not fire it......even with your hand!

Pretty much what every one said.

Have somebody make a 5.7x28 with an ambi paddle magazine release, too!

PainKillaX wrote:Have somebody make a 5.7x28 with an ambi paddle magazine release, too!

Might as well have them mimic the whole PPQ M2 Navy version with a paddle.

grimmond wrote:

PainKillaX wrote:Have somebody make a 5.7x28 with an ambi paddle magazine release, too!

Might as well have them mimic the whole PPQ M2 Navy version with a paddle.

Sounds good to me, but with a grip like the HK VP9 and a low slide and bore axis like the CZ P-01. Keep the trigger and fully ambi controls off the Q. 4" barrel with an optional 5.5 threaded. Uses Glock sights.

A guy can dream...

I would be interested if they were from good firms that make and support their products.

A cheap and unreliable pistol is in effect worthless to me.

Most of us have seen that too often of late.

One will be from a well known and respected firm.


The other? Not so much.

OK I'm excited about this!

When can we expect more information? :thumb:

As soon as I get it.

https://www.youtube.com/watch?v=9bn78X5WFZ4" onclick="window.open(this.href);return false;

I considered the Masterpiece Arms pistol for about 5 seconds and than no.

It doesn't fit my needs.

MAC-10 based design could work if they updated the engineering.

any new updates on this? I am pretty excited to see a new handgun chambered in 5.7x28. I hope its berretta.

No the decided to revamp and start from scratch.

That's pretty disappointing to say the least. Both companies??? Any idea what made them scrap everything they had done? Sounds like a pretty drastic thing to do...

Nope, but they are still working on it.

Does anybody make extended barrels for the MkII, around 8" long?

I had prototyped a 7 and 8. 7 is best. Working on a run of them now.

whatever happened to these projects? Any news on the fort 28? seems like they updated their website and made a youtube video .

Any news or updates on these?

Wait a couple weeks

I REALLY WANT ONEEEEEE

Buffman wrote: ↑

12 Jul 2018, 16:51

Wait a couple weeks

Taking a page out of the LaRue play book I see.

PainKillaX wrote: ↑

13 Jul 2018, 15:14

Buffman wrote: ↑

12 Jul 2018, 16:51

Wait a couple weeks

Taking a page out of the LaRue play book I see.

Gotta play by the rules sometimes

PainKillaX wrote: ↑

13 Jul 2018, 15:14

Buffman wrote: ↑

12 Jul 2018, 16:51

Wait a couple weeks

Taking a page out of the LaRue play book I see.

LOL He has to, and not to brag to much but Buffman has one to review because I asked them to get him one.

panzermk2 wrote: ↑

14 Jul 2018, 11:06

PainKillaX wrote: ↑

13 Jul 2018, 15:14

Buffman wrote: ↑

12 Jul 2018, 16:51

Wait a couple weeks

Taking a page out of the LaRue play book I see.

LOL He has to, and not to brag to much but Buffman has one to review because I asked them to get him one.

Yep, owe that one to Jay.

Any updates?