Page 11 of 12

Re: Reloading equipment for 5.7x28mm

Posted: 16 Apr 2015, 11:08
by jkelley209
Thanks very much. Did you see the video i did on the Lyman loads ? i did a work up on True Blue but wasn't anywhere near 2000 fps

https://www.youtube.com/watch?v=mTM2MswyLgg" onclick="window.open(this.href);return false;

Re: Reloading equipment for 5.7x28mm

Posted: 16 Apr 2015, 12:59
by jkelley209
i've never heard of PBC673 who makes that?

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 07:23
by panzermk2
jkelley209 wrote:i've never heard of PBC673 who makes that?

Wait for it..............PB.



Watch this video

http://www.pbclermont.be/video" onclick="window.open(this.href);return false;

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 07:54
by jkelley209
WHERE CAN YOU GET IT IN THE US JAY? AND WHAT DO THE CALL IT HERE?

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 14:17
by panzermk2
You can't in anyway get it, you can't import it, You can't even get to look visit the factory and look where it could be made.


If you could I would have.

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 15:11
by Bazzer69
Are the powder makers trying to " choke" the USA ? Politics ?

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 15:18
by Rapier1772
Personally I think it's the politics are trying to choke the powder supplies in the US.

However, there have also been actual supply issues not including the ever present hoarding. I think one major manufacturer even had a fire in which gunpowder wouldn't last long :D

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 15:18
by panzermk2
No they are proprietary powders designed for FNH and under contract can only be made to order and only sold to FNH. This actually very common practice.

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 15:24
by Bazzer69
FN is a Belgium Euro company , the Euro's mostly hate the USA , they supply NATO who also dislike the USA , yes I know the USA is a member. So it doesn't surprise me they are deliberately restricting supplies to the USA

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 15:24
by blueorison
BUT HOW DO I GET SAME, I NED TO LDE THEM AMMUNTNS

Re: Reloading equipment for 5.7x28mm

Posted: 17 Apr 2015, 15:36
by Bazzer69
jkelley209 wrote:Thanks very much. Did you see the video i did on the Lyman loads ? i did a work up on True Blue but wasn't anywhere near 2000 fps

https://www.youtube.com/watch?v=mTM2MswyLgg" onclick="window.open(this.href);return false;
Not that impressed with PB. Notice the big ding in one of the rounds near the end of the video ?

Re: Reloading equipment for 5.7x28mm

Posted: 19 Apr 2015, 13:01
by panzermk2
Bazzer69 wrote:
jkelley209 wrote: Not that impressed with PB. Notice the big ding in one of the rounds near the end of the video ?

Really? You have used PBC powder?



A ding in a test round used for that type of testing is irrelevant.

Re: Reloading equipment for 5.7x28mm

Posted: 19 Apr 2015, 13:21
by Bazzer69
Of course I not used the powder because I don't think it's available to the general public. If I was making a video about my products I would ensure all that was shown was perfect.
Ps what happened to the T6 I ordered?

Re: Reloading equipment for 5.7x28mm

Posted: 19 Apr 2015, 19:22
by panzermk2
PM Me the email address you used too order so I can resend your tracking number.

Re: Reloading equipment for 5.7x28mm

Posted: 13 Jun 2015, 12:29
by satellitedr3ams
Confirmed that it will work with the Newer Trimpro2 Universal Shellholder and it fits tight too. Maybe not as nice as the EA one, but it still works! :thumb:
You can actually upgrade your earlier gen Trimpro to the new one with this here and it will accept several calibers - http://www.midwayusa.com/product/271401 ... conversion" onclick="window.open(this.href);return false;

Image

Image

Re: Reloading equipment for 5.7x28mm

Posted: 14 Jun 2015, 14:48
by jkelley209

https://www.youtube.com/watch?v=wIL8oVyowlM" onclick="window.open(this.href);return false;

Re: Reloading equipment for 5.7x28mm

Posted: 06 Nov 2015, 16:40
by Lbaumann
Please help with 40vmax. Accurate #7 powder. How many grains? Also how do fix dies so the neck properly

Tried rcbs ,lee same. Ordered some from Jay at EA
Tried some rounds at 6 g and some would jam and pop up clip
I got a lot of reloading under my belt. Looks like neck problem. Need help pleaseu

Re: Reloading equipment for 5.7x28mm

Posted: 06 Nov 2015, 17:03
by Rapier1772
First, for which platform are you loading? The FiveseveN, PS90, AR57, something else?
Since you said "pop up clip" I am assuming the PS90 or AR57. (BTW, they're magazines, not clips)

Here are some threads that should cover what you're looking for as far as powder charge. Just pick the one that applies to you firearm. http://www.fivesevenforum.com/search.ph ... mit=Search" onclick="window.open(this.href);return false;
Those threads are a good place to start anyway. Since the author's loads (for the PS90) for #7 went over 7gr and you're popping mags at 6gr, there may be something else going on.

I have no idea what you are trying to ask on this:
Also how do fix dies so the neck properly
If there is a problem with the neck, it might help to post pictures of the cases. The instructions for how to post pics are linked in my sig line.

Re: Reloading equipment for 5.7x28mm

Posted: 09 Nov 2015, 10:21
by panzermk2
He is having issues with the sizer die body on his RCBS dies, that is what he is referring to.

Re: Reloading equipment for 5.7x28mm

Posted: 09 Nov 2015, 10:41
by Rapier1772
Then it's a manufacturer's problem, not much he can do except return it & get a different/better set of dies.