SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Discuss the variety of handguns out there.
Post Reply
User avatar
panzermk2
Forum Supporter
Posts: 11542
Joined: 19 Aug 2008, 15:51
Location: Around here it's more like what can we shoot through next.
Contact:

SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by panzermk2 » 27 Sep 2014, 06:37



SIG SAUER announces the release of a factory P220 in 10mm
BY Jerry Jones | Posted on 09/26/2014 by Jerry Jones | IN

Modern Service Pistols

As first reported midweek by SIGforum.com, SIG Sauer has announced that a 10mm version of their venerable P220 will be released at the SHOT Show in January.

The fascination with a 10mm P220 first started with Bruce Gray of Grayguns, Inc, who accepted a challenge that the P220 10mm conversion “couldn’t be done”. Bruce made limited conversion runs of all steel P220 .45 ACP pistols to 10mm. This was a painstaking task as it took quite a bit to get the pistol chambered in .45 ACP to run the 10mm reliably.

The P220/10 will be have both SAO and DA/SA configurations, and will be available in 4.25 and 5 inch lengths. It will be based upon their all steel P220 Elite series of pistols as it is being reported.


http://modernserviceweapons.com/?p=11697" onclick="window.open(this.href);return false;
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

Oldbindlestiff
Gold Member
Posts: 389
Joined: 22 Apr 2011, 08:13
Location: Newport, TN

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by Oldbindlestiff » 27 Sep 2014, 08:32

Whoop! Anyone want to buy a kidney...?!
Karma. Serving up justice one a**hole at a time.

User avatar
Rapier1772
Global Moderator
Posts: 12133
Joined: 20 Aug 2008, 09:00
Location: American Falls, ID

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by Rapier1772 » 28 Sep 2014, 09:09

Wish I had another motorcycle to sell.
Contrary to popular belief, you CAN fix stupid - it's just illegal.
Tactical Search Instructions & tips: http://www.fivesevenforum.com/viewtopic.php?f=3&t=12045

User avatar
Cyberfly
Global Moderator
Posts: 10605
Joined: 19 Aug 2008, 18:44
custom title: Mens Room Attendant
Location: SE OKlahoma

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by Cyberfly » 28 Sep 2014, 10:47

I wish you had another motorcycle I could sell...
Never confuse 'The will of the Majority' with 'The will of God'.
**This post created with 100% recycled photons!**

bruteandbear1
Member
Posts: 387
Joined: 04 Feb 2013, 21:46
custom title: CHICAGO BEARS!!!
Location: cda, Idaho

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by bruteandbear1 » 28 Sep 2014, 14:45

How much are they stock like $1,300 buckaroos?

User avatar
Vortec MAX
Gold Member
Posts: 1159
Joined: 09 Nov 2008, 17:56
Location: Idaho

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by Vortec MAX » 29 Sep 2014, 06:17

I am a big P220 fan... so this is very cool. Still waiting for a P226 or P229 in 5.7x28 :)

Mike

DoubleJ
Member
Posts: 400
Joined: 10 May 2011, 20:20

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by DoubleJ » 29 Sep 2014, 19:28

Why would anyone make a gun out of steel? Don't they know there's polymer? Either way, I like 10mm, so I can dig it. G20 for me though.

User avatar
blueorison
Competition/Training Mod
Posts: 10628
Joined: 11 Apr 2009, 14:28
custom title: UT/EA Pistol Captain
Contact:

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by blueorison » 30 Sep 2014, 10:18

bruteandbear1 wrote:How much are they stock like $1,300 buckaroos?
Seriously?! Not worth it at all.

The older Sigs actually work, but I still don't like the design. It's as clunky as old HKs. The new HKs have learned from the mistakes of the past. Sigs....
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.

User avatar
Vortec MAX
Gold Member
Posts: 1159
Joined: 09 Nov 2008, 17:56
Location: Idaho

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by Vortec MAX » 30 Sep 2014, 14:32

blueorison wrote:The older Sigs actually work, but I still don't like the design. It's as clunky as old HKs. The new HKs have learned from the mistakes of the past. Sigs....
Blasphemy!

Mike

bruteandbear1
Member
Posts: 387
Joined: 04 Feb 2013, 21:46
custom title: CHICAGO BEARS!!!
Location: cda, Idaho

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by bruteandbear1 » 30 Sep 2014, 15:06

:agree: I am sure they didn't make them just for YOU!!!

User avatar
panzermk2
Forum Supporter
Posts: 11542
Joined: 19 Aug 2008, 15:51
Location: Around here it's more like what can we shoot through next.
Contact:

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by panzermk2 » 01 Oct 2014, 09:40

Vortec MAX wrote:
blueorison wrote:The older Sigs actually work, but I still don't like the design. It's as clunky as old HKs. The new HKs have learned from the mistakes of the past. Sigs....
Blasphemy!

Mike

Yep.
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

User avatar
blueorison
Competition/Training Mod
Posts: 10628
Joined: 11 Apr 2009, 14:28
custom title: UT/EA Pistol Captain
Contact:

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by blueorison » 01 Oct 2014, 14:06

bruteandbear1 wrote::agree: I am sure they didn't make them just for YOU!!!
I'd hope not; if they did, they did a horribad job.

LOL

Older sigs are clunky; however, the 2-3 P210's I've shot weren't that clunky; just the American models. Newer sigs are also clunky with slides that are much too high.

I've shot one too many new-generation factory Sigs that have jammed (namely, the .380 for-carry models/1911 models) to look at them as dependable. The older models I've almost never/can't recall seeing a jam.

Then again S&W's carry models like the Shield, Beretta's Nano, are all unreliable, jam-friendly guns with small windows for failure.

Sig rifles are ok. They go bang, are clunky, unbalanced, and unnecessarily weighted down.

Back on track to the 10mm; They should have released a 6in barrel model. Then again, I'm glad they didn't, so I don't feel bad skipping over it. :)
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.

User avatar
Vortec MAX
Gold Member
Posts: 1159
Joined: 09 Nov 2008, 17:56
Location: Idaho

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by Vortec MAX » 01 Oct 2014, 14:47

OK Blue. Since you are not specifically talking about the classic P-series. We might can stay friends.

:)

Mike

User avatar
panzermk2
Forum Supporter
Posts: 11542
Joined: 19 Aug 2008, 15:51
Location: Around here it's more like what can we shoot through next.
Contact:

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by panzermk2 » 01 Oct 2014, 21:57

blueorison wrote:
Back on track to the 10mm; They should have released a 6in barrel model. Then again, I'm glad they didn't, so I don't feel bad skipping over it. :)
An extended barrel would be easy.
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

PainKillaX
Senior Member
Posts: 3196
Joined: 08 Nov 2009, 21:01
custom title: I rep that west
Location: Seattle, WA

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by PainKillaX » 01 Oct 2014, 23:43

blueorison wrote:Newer sigs are also clunky with slides that are much too high.

We just picked a Sig P320 (the new striker-fired P250) and the big complaint I keep finding is that the barrel is too high for a striker-fired weapon. It did feel a little 'tall' in my hand but I wouldn't call it clunky. It feels real, real nice in my hands. I'll likely be buying one strictly for myself. I shot it better than I've ever shot a pistol out of the box, which could just be me becoming a better shooter, but I liked it.

We also have a P238, the .380 mini-1911. Kind of a pain in the butt.

</derailing>

User avatar
blueorison
Competition/Training Mod
Posts: 10628
Joined: 11 Apr 2009, 14:28
custom title: UT/EA Pistol Captain
Contact:

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by blueorison » 02 Oct 2014, 15:01

Vortec MAX wrote:OK Blue. Since you are not specifically talking about the classic P-series. We might can stay friends.

:)

Mike
No way, the P210's are super awesome. I've very fortunate to have shot a couple that were brought straight from Europe. The owners traveled there multiple times just to purchase the firearm. I don't know how the import laws worked etc. but they brought it back home. I have not shot the new updated P210 but I'm sure it's just as great.

The P220 S was also fun to shoot.
PainKillaX wrote:
blueorison wrote:Newer sigs are also clunky with slides that are much too high.

We just picked a Sig P320 (the new striker-fired P250) and the big complaint I keep finding is that the barrel is too high for a striker-fired weapon. It did feel a little 'tall' in my hand but I wouldn't call it clunky. It feels real, real nice in my hands. I'll likely be buying one strictly for myself. I shot it better than I've ever shot a pistol out of the box, which could just be me becoming a better shooter, but I liked it.

We also have a P238, the .380 mini-1911. Kind of a pain in the butt.

</derailing>
Yeah, too high off the hand. The newer grips are slimmer, alike the newer HK line.

I've shot 3, P238's. All jammed with brand named ammo. Also felt like it was made overseas in someone's garage from spare parts and unfinished slides.
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.

bruteandbear1
Member
Posts: 387
Joined: 04 Feb 2013, 21:46
custom title: CHICAGO BEARS!!!
Location: cda, Idaho

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by bruteandbear1 » 02 Oct 2014, 15:28

Ya my dad has a 1911 c3 sig in 45 acp. That gun cost him a little under $1200 bucks and its one of my favorite pistols have never had issue with it whatsoever, but of course there is no comparison my Mark 2 five seven is way better haha. I would really enjoy a 10mm and i would definietly go with a sig. My buddy reloads them and they are truely the best 10mm loads i have ever shot.

User avatar
panzermk2
Forum Supporter
Posts: 11542
Joined: 19 Aug 2008, 15:51
Location: Around here it's more like what can we shoot through next.
Contact:

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by panzermk2 » 03 Oct 2014, 11:16

My other Sigs feel lonely, they are asking that this one join them.
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

User avatar
Cyberfly
Global Moderator
Posts: 10605
Joined: 19 Aug 2008, 18:44
custom title: Mens Room Attendant
Location: SE OKlahoma

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by Cyberfly » 03 Oct 2014, 20:04

I think Jay won the internet with that last post.
Somebody print it and mail it to Lisa...
Never confuse 'The will of the Majority' with 'The will of God'.
**This post created with 100% recycled photons!**

User avatar
panzermk2
Forum Supporter
Posts: 11542
Joined: 19 Aug 2008, 15:51
Location: Around here it's more like what can we shoot through next.
Contact:

Re: SIG Sauer P220 10mm FACTORY GUN!!!!!!!!!!!!!!!!!!!!!

Post by panzermk2 » 03 Oct 2014, 20:06

Cyberfly wrote:I think Jay won the internet with that last post.
Somebody print it and mail it to Lisa...
:thumb:
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest