Exploded Parts Diagram for PS90

[powertrip222]

Hello Everyone: I was wondering if anyone has or knows where I can obtain a parts diagram for the PS90. I have not been able to find one and I would like to have it for reference and to add to my files in case I need to obtain parts. Thanks in advance for any help. :patriot:

[Tripletap]

I could never find spare parts for sale anywhere, so I just bought a second PS90 to cannibalize if needed in the future.

[Rapier1772]

This has been brought up before but no one has been able to either get ahold of a FN manual & make a copy or they are unwilling to violate the copyrights. Not sure how to get around the particulars...

2nd PS90 to cannibalize? If the 1st one breaks just use the 2nd to keep shooting :thumb: Then caninibalize as needed & if possible but hopefully you wont have that many problems

[powertrip222]

Thanks for the responses, that's just my luck. Maybe sometime in the future they will become accessible to general public.

[shooter629]

hey.

Don't know if anyone seen this yet, and software as well...
http://www.neoarms.com/index.php?dcode=088373481083" onclick="window.open(this.href);return false;

[Grantness]

Nice find! :thumb:

[shooter629]

hi

Never heard anything bad until your post ,the guy seems to be doing fine lately, received my temp copy so far..I was not aware of any other problems and the copy I received is nice!
My experience so far is good.

shooter629

[MrSlippyFist]

I've heard about nothing but problems with that company for the last 3 years.

[Grantness]

yea Ive heard ...things too. But thats still a nice poster.

[WeAreNotAlone]

According to the Neoarms website, dated October 28th,2009 they are out of business.
http://www.neoarms.com/message.html

Q: Did anyone ever obtain the PS90 poster?


Q: Ditto on the software....

Anyone?

Note to FN marketing department, you should be passing out things such as the above like candy, free for the asking...
(Especially considering how much profit you're making on each P90/PS90)


.

[Esteves]

As near as I can tell, the owner/staff of NeoArms have dissapeared off of the face of the earth. He/they do not respond to email and never answer the phone or return phone messages. I have an unfilled order from last summer (I should have known better then) that is still unresolved.

Usually, the strongest message I give others is "Caveat emptor." In the case of NeoArms, I say "Stay the F--- away. Do not do business with them if you know what's good for you."

[freelienr]

I could never find spare parts for sale anywhere, so I just bought a second PS90 to cannibalize if needed in the future.

could you buy a second one for me? i'm broke from the first :laugh:

[WeAreNotAlone]

As near as I can tell, the owner/staff of NeoArms have dissapeared off of the face of the earth. He/they do not respond to email and never answer the phone or return phone messages. I have an unfilled order from last summer (I should have known better then) that is still unresolved.

Usually, the strongest message I give others is "Caveat emptor." In the case of NeoArms, I say "Stay the F--- away. Do not do business with them if you know what's good for you."

Maybe I should have been more direct,

Neoarms is OUT of BUSINESS.

Does anyone have a copy of the Visual P90* and Visual PS90 software?
Does anyone have a pic /scan /spare copy of the diagram?


.

[f3rr37]

From their website:

NeoArms - A Quick Update.
October 28th | 1:31PM

I say with great regret that two months ago, NeoArms essentially went broke after suffering several months of poor sales and nearly eight months of costly delays on the software project. During the process, I not only lost my business and two great employees, but my house and car as well. I have good news though: This morning, I regained access to the company web server and e-mail accounts. Throughout next 10 days, I will be tackling the 1,000+ e-mail back log and contacting customers with currently pending orders. Customers will have the option of receiving a refund or having their order fulfilled. Please bear with me as I hope to have everyone taken care of by mid-November. I will also try to get phone and some sort of live chat support up and running by next week. I offer my thanks to everyone for their patience and understanding during this process.

I will update this page with more info very soon. I will also be posting a message and some e-mails in response to a few wildly inaccurate internet posts I've read recently regarding NeoArms and myself.

[WeAreNotAlone]

.
I'll try this one more time....


As it is highly unlikely that Neoarms will ever be a source for a diagram /poster that shows the PS90 in a 3D exploded view at any point in the future does anyone here have a copy/scan/pic of the poster / 3D Visual P90* and Visual PS90 software that Neoarms was distributing /planned on distributing?



.

[f3rr37]

.
I'll try this one more time....


As it is highly unlikely that Neoarms will ever be a source for a diagram /poster that shows the PS90 in a 3D exploded view at any point in the future does anyone here have a copy/scan/pic of the poster / 3D Visual P90* and Visual PS90 software that Neoarms was distributing /planned on distributing?

No, these were in development products and have never been released.

[WeAreNotAlone]

.
I'll try this one more time....


As it is highly unlikely that Neoarms will ever be a source for a diagram /poster that shows the PS90 in a 3D exploded view at any point in the future does anyone here have a copy/scan/pic of the poster / 3D Visual P90* and Visual PS90 software that Neoarms was distributing /planned on distributing?

No, these were in development products and have never been released.

Software=Vaporware, Check (N/A)

On that 3D poster.... where (or should I say how) the heck can someone (EG: A potential customer that plans on spending many , many thousands of dollars with that manufacturer on a low cost to manufacture /high profit item) obtain something like it, service info (Breakdown of unit with part numbers/exploded view)

As a side note:
I was googling the other day and ran across a competing weapons system (far more advanced- and from a cost standpoint costing allot more to manufacturer than the PS90/P90) series by a long shot and was able to download: A: Owners/Operation manual, and B: Armorers Manual.


.

[f3rr37]

.
I'll try this one more time....


As it is highly unlikely that Neoarms will ever be a source for a diagram /poster that shows the PS90 in a 3D exploded view at any point in the future does anyone here have a copy/scan/pic of the poster / 3D Visual P90* and Visual PS90 software that Neoarms was distributing /planned on distributing?

No, these were in development products and have never been released.

Software=Vaporware, Check (N/A)

On that 3D poster.... where (or should I say how) the heck can someone (EG: A potential customer that plans on spending many , many thousands of dollars with that manufacturer on a low cost to manufacture /high profit item) obtain something like it, service info (Breakdown of unit with part numbers/exploded view)

As a side note:
I was googling the other day and ran across a competing weapons system (far more advanced- and from a cost standpoint costing allot more to manufacturer than the PS90/P90) series by a long shot and was able to download: A: Owners/Operation manual, and B: Armorers Manual.


.

FN doesn't like to give that stuff out.

[ninthinning]

:thumb:

[Rapier1772]

That poster Neoarms was coming out with looked cool, I wouldn't mind having it. Do I have to have a reason? :p

[ridesdirt]

That poster Neoarms was coming out with looked cool, I wouldn't mind having it. Do I have to have a reason? :p

+1 I want on too.

[f3rr37]

Update!

http://neoarms.com/" onclick="window.open(this.href);return false;

I emailed Tyler from neoarms a while ago and he just got back to me saying that he's been working on the poster and software and that they are coming back from the dead.

[panzermk2]

Has he gotten his shit together?

[f3rr37]

Has he gotten his shit together?

From what he said it sounds like it...

[panzermk2]

I don't want to go into details in public, you know some of it, But I had around 9 months of being strung along by him.

We will see.

[Esteves]

We will see.

+1
I did, finally, get notice on Friday that my order placed in June would be shipping next week.

[Elephant Rider]

Hi all,

I've got the original from last year and it is pretty nice. Also I got an email last week saying another one is on the way. When the new one arrives I'll get pics of both so there is a comparison and post them.

-ER

[f3rr37]

Looks like their website/shopping cart will be live Monday.

[swenk]

I higher res version of that poster would make a kick ass computer background. But when its blown up a bit it is too blurry.

[jmz5]

Tyler gave me one of those posters a couple weeks ago, they are real nice.

[Esteves]

We will see.

+1
I did, finally, get notice on Friday that my order placed in June would be shipping next week.

Tyler and I are squared up.
Everything that I ordered, that he could produce, he shipped. He refunded the remainder.

The poster is very nice.

I retract my STFA. Caveat emptor still applies.

[shooter629]

Have the (Black/white/gray) poster. has 3 dime size stains on it with a line on one side, not affecting the parts. might be willing to let you have it, have pic, email me. Seen one that just sold on Amazon, 100.00 Wow!!!!!!!

[f3rr37]

Neoarms website is gone now... I'd call them officially dead. Was really hoping they'd get their stuff together and get some products released.

[panzermk2]

Neoarms website is gone now... I'd call them officially dead. Was really hoping they'd get their stuff together and get some products released.

I talk to Tyler every few weeks. I will ask about more posters.