REM T3b for the Black Ring Sight now on sale

Manufacturer of the Reticle Enhancement Module 3 for the PS90, Illuminates the White Ring Sight,The Black Ring Sight and the Green Dot Fiber Optic Ring Sight.
"Peace Through Strength" merchandise

Moderator: M1P90

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

REM T3b for the Black Ring Sight now on sale

Post by M1P90 » 07 Jul 2009, 10:57

The REM T3b for the PS90 USG "Black Ring Sight" is now available for sale and is in stock. :clap:
The Price is $89.00 shipped. I take Visa, Mastercard and Discover or check or money order. I do also take PAYPAL.
Go to http://WWW.M1Bullpup.com" onclick="window.open(this.href);return false; to pay.

The Reticule Enhancement Module (T-bar) 3b is to be used as a back up to the Black Ring Sight. Try to rely on the Black Crosshairs when possible.

The Reticule Enhancement Module 3b (REM T3b) fixes the problem that is inherent in the Black Ring Sight. We all know in certain low light conditions the Ring Sight looses its sight picture. When that happens just turn on the REM T3b and you will get a sharp T bar sight picture.

The REM T3b Illuminates the T bar via a colored LED red or green or blue that is attached to the underside of the Ring Sight. There needs to be minor drilling and gluing to affix the T3b to the Sight.

It has 11 illumination settings so the T bar can be seen outdoors in daylight (on its brightest setting) or in total darkness (on its lowest setting). The REM T3b fits in the sling well just under the Ring Sight. It is ambidextrous so it can be mounted on the left or right side of the rifle.

The REM T3b uses one CR2032 3 volt battery. The battery life is 106 hours of continuous use.

Since we did not make the Rheostats...
The REM T3b has a 1 YEAR Warranty. I will replace it if it fails due to a manufacturing problem. (I will have to examine it first to make sure there wasn't some other factor that caused the failure). You just pay for the shipping ($5.00). If after 1 year a manufacturing problem should occur... contact me and I will see what I can do for you.

The REM T3 comes with a 30 day money back guarantee. If you are dissatisfied with it, please send it back to me and I will give you a full refund. (You just pay the shipping)

Black Ring Sight with REM T3b
Image

Standard view of the USG on a cloudy day.
Image


Same view with the REM T3b turned on high.
Image


Standard view of the USG against a black target. (Can't see a thing)
Image


Same view with the REM T3b turned on high. (I can see!) :D
Image


Same view with the REM T3b turned on high (green LED).
Image

Same view with the REM T3b turned on high (blue LED).
Image
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: REM T3b for the Black Ring Sight coming soon

Post by M1P90 » 29 Jul 2009, 18:45

USG sight in normal mode.
Image


USG sight with the REM T3b set on #1 (red LED)
Image

USG sight with the REM T3b set on #1 (green LED)
Image

USG sight with the REM T3b set on #1 (blue LED)
Image
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

Wollychop
Senior Member
Posts: 5447
Joined: 20 Aug 2008, 09:09
Location: MN

Re: REM T3b for the Black Ring Sight coming soon

Post by Wollychop » 29 Jul 2009, 19:12

Very cool... Can't wait!

Will this module also be compatible with white reticule sights (i have PS90s with both)?

User avatar
Cyberfly
Global Moderator
Posts: 10605
Joined: 19 Aug 2008, 18:44
custom title: Mens Room Attendant
Location: SE OKlahoma

Re: REM T3b for the Black Ring Sight coming soon

Post by Cyberfly » 29 Jul 2009, 20:33

:D
That IS sweet!
Never confuse 'The will of the Majority' with 'The will of God'.
**This post created with 100% recycled photons!**

User avatar
jmz5
Site Admin
Posts: 11105
Joined: 18 Aug 2008, 21:26
custom title: Proprietor
Location: Pennsylvania
Contact:

Re: REM T3b for the Black Ring Sight coming soon

Post by jmz5 » 30 Jul 2009, 03:45

That looks awesome.
كاف

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: REM T3b for the Black Ring Sight coming soon

Post by M1P90 » 30 Jul 2009, 03:48

Wollychop wrote:Very cool... Can't wait!

Will this module also be compatible with white reticule sights (i have PS90s with both)?
No.
The white reticle sight needs the LED housing to fit in the light collection well while the
black reticle sight needs the LED to be permanently attached to the underside. Also, the wire needs to be 1/2 inch longer.

There needs to be a minor operation on the USG sight in order to expose the tritium bar and to attach the LED. Make sure you don't cut too deep or you may damage the glass optic.
I'll do the procedure at no extra cost.

You will need a Dremel and use this tool to drill a hole in the rubber Tritium cover.
Image

You will also need an exacto knife to finish cleaning out the hole to expose the Tritium.
Image

NOW THE FUN STARTS.

1) Cut a small hole the size of the LED and expose the Tritium bar. Be careful not to drill the Tritium. (drill slowly)
Image

2)Make sure the hole is centered.
Image

Image

3) Finish removing debris from hole by cutting the rubber and pulling it out with tweezers.
Image

4) Picture of completed hole.
Image

5) Use 5 minute epoxy to attach T3b to Ring Sight
Image

6) Immobilize the T3b to the Ring Sight and insert the LED into the hole.
Hold it in place with the tip of the exacto knife.
Image

7) While holding the LED in place, Cover the LED and rubber area and part of the metal with the 5 minute epoxy. You will have to hold the LED for 5 minutes.
Image

8) After 5 minutes pull out the knife and then use the back flat part of the knife to hold the LED in place untill the epoxy solidifies. (another 5 munites)
Image

9) Completed process.
Image

10) Carefully bend the LED wire to the side of the Ring Sight you desire.
Image

11) Attach the REM T3b to the rifle and re-attach your Ring Sight.
ALL DONE!!
Image


You can now see the cross hairs in any light condition and against any background. :shock:
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
Esteves
Wiki Moderator
Posts: 3159
Joined: 20 Aug 2008, 10:23
custom title: Shhh!
Location: Tucson, AZ

Re: REM T3b for the Black Ring Sight coming soon

Post by Esteves » 30 Jul 2009, 06:53

Nice!
--
S
© 2005-2017 Esteves

Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.

Merlin
Junior Member
Posts: 12
Joined: 24 Aug 2009, 10:38

Re: REM T3b for the Black Ring Sight coming soon

Post by Merlin » 24 Aug 2009, 11:24

Newbie here. :p Are you still on schedule for the end of September release? Thanks.

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: REM T3b for the Black Ring Sight coming soon

Post by M1P90 » 25 Aug 2009, 03:10

Merlin wrote:Newbie here. :p Are you still on schedule for the end of September release? Thanks.
So far so good. Image

11/14/09 The REM T3b is now in stock!!!! :drool:
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

Merlin
Junior Member
Posts: 12
Joined: 24 Aug 2009, 10:38

Re: REM T3b for the Black Ring Sight coming soon

Post by Merlin » 25 Aug 2009, 18:59

M1P90 wrote:
Merlin wrote:Newbie here. :p Are you still on schedule for the end of September release? Thanks.
So far so good. Image

I do have 10 units available right now. But thats it until I receive more parts.

let me know if you want one of those.
Yes, I am interested. Will have to wait until I receive the PS90 though, want to make sure what I have so I get the correct version. Thanks.

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: REM T3b for the Black Ring Sight coming soon

Post by M1P90 » 06 Oct 2009, 10:43

REM T3b Instruction Manual

Thank you for purchasing this upgrade to your PS90 Ring Sight. The REM T3b was designed to maximize your shooting pleasure by fixing the deficiencies of the Ring Sight.

Image

Installation
1) Carefully bend the LED wire
to the side of the Ring Sight you prefer.
2) Place the dialed rheostat on one side of the Sling Well and the small holder on the other side. Tighten the mounting screws until both sides are secure. Use the Allen wrench that is supplied for this procedure. (DO NOT OVER-TIGHTEN) to prevent damage to the screw pins. You can use BLUE thread locker if you like but it is not necessary.
3) Re-attach your Ring Sight to the PS90.

Image


You can now turn on and use the REM T3b.


NOTE: The REM T3b does not interfere with the Tritium Bar so in total darkness you can still rely on that as a light source if desired.

NOTE: When using the REM T3b in total darkness, with no tactical lights in use, you may notice a slight glow on the front optic glass within short distances (less than 10 feet.) This does not interfere with use of the REM T3b.

Battery Replacement
Hold the “numbered part” of the Rheostat so it doesn’t turn. Turn the outside Rheostat battery cover counter clockwise to remove cover. The REM T3b uses one Lithium 3volt CR2032 battery. This package contains ONE spare battery for your convenience.

Warranty
This Product is warranted against original defects in material and/or manufacturing for one year. This warranty is void if the unit has been abused, disassembled, or modified/tampered with in any way from its original configuration.

This warranty does not apply to defects caused by normal wear and tear, improper handling, incorrect installation, accidents, and alterations/modifications to the original configuration, repairs made by unauthorized parties, aftermarket accessories, or abnormal use.

Contact Us
We hope you find the REM T3b to be a great enhancement. We invite your comments. If you have any questions, concerns or comments, please contact us at 978-852-8584 or croenker@verizon.net.

Visit my web site at:
http://www.M1Bullpup.com" onclick="window.open(this.href);return false;
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: REM T3b for the Black Ring Sight now on sale

Post by M1P90 » 23 Oct 2009, 07:29

The REMT3b is now available for sale and I have them in stock!!

Come and get em!! :D
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

Augustus
Junior Member
Posts: 100
Joined: 12 Nov 2008, 18:32

Re: REM T3b for the Black Ring Sight now on sale

Post by Augustus » 11 Nov 2009, 13:08

A couple questions : When mounted, does the wire / dial block the backup iron sights on the side that it is mounted on?
If I send you my optic, can you install the LED, then send it back to me for re-mounting?

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: REM T3b for the Black Ring Sight now on sale

Post by M1P90 » 11 Nov 2009, 20:41

The Wire does block the Back up iron sights for the side it is mounted.
I install the T3b to your Ring Sight for free.
Just send me your sight and tell me what color LED ( Red or Green or Blue ) you desire
You can go to my web site http://www.M1bullpup.com" onclick="window.open(this.href);return false; to order :thumb:
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: REM T3b for the Black Ring Sight now on sale

Post by M1P90 » 27 Jan 2010, 07:39

I now have the REM T3b in 3 colors. RED, GREEN and BLUE.

My web site is completed and back up and running. :monkey:

I now take visa, mastercard and discover along with paypal.

Check out my new line of "Peace Through Strength" merchandise. :D
http://www.M1Bullpup.com" onclick="window.open(this.href);return false;
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

User avatar
panzermk2
Forum Supporter
Posts: 11550
Joined: 19 Aug 2008, 15:51
Location: Around here it's more like what can we shoot through next.
Contact:

Re: REM T3b for the Black Ring Sight now on sale

Post by panzermk2 » 27 Jan 2010, 08:13

:thumb: Glad to here that you have gotten through all the CC Processor BS!
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

User avatar
f3rr37
Site Admin
Posts: 14666
Joined: 19 Aug 2008, 12:09

Re: REM T3b for the Black Ring Sight now on sale

Post by f3rr37 » 27 Jan 2010, 08:59

Great looking website!

User avatar
panzermk2
Forum Supporter
Posts: 11550
Joined: 19 Aug 2008, 15:51
Location: Around here it's more like what can we shoot through next.
Contact:

Re: REM T3b for the Black Ring Sight now on sale

Post by panzermk2 » 27 Jan 2010, 10:02

Is that you chopping prior CC processors?
Jay Wolf
Pr. Elite Ammunition

"Engineers, the oompa-loompas of science!"

Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Image

User avatar
M1P90
Forum Supporter
Posts: 306
Joined: 20 Aug 2008, 08:19
Location: Socialist Republic of Mass.
Contact:

Re: REM T3b for the Black Ring Sight now on sale

Post by M1P90 » 27 Jan 2010, 11:25

panzermk2 wrote:Is that you chopping prior CC processors?
:laugh: Got to take my frustration out on somthing! :wall:
May as well get some excercise and get wood for my wood stove at the same time. :thumb:
Image

PEACE THROUGH STRENGTH
http://www.M1bullpup.com" onclick="window.open(this.href);return false;

freelienr
Senior Member
Posts: 562
Joined: 11 Jan 2010, 16:36

Re: REM T3b for the Black Ring Sight now on sale

Post by freelienr » 27 Feb 2010, 09:22

good gravy those are cool! I've seen the illumination before, but not in the green and blue. Love the blue, so cool looking.. and the green..and the red :laugh:
I used to have a scope that cycled through red and green, should have kept that :( .

M1, have considered making a multi-color version? When you turn the power from 1-11 it cycles a color for a section of power levels i.e.: Green for 1-4, Red for 5-8, Blue for 9-11. They make LEDs that can cycle colors correct?
Judging from the pictures you took blue is the brightest i imagine this makes it more effective in higher levels of light (or does it start to wash out on bright, lighter toned backdrops?)
Red looked like a good middle color and green seemed to keep a low yet visible level on #1 making it ideal for dark situations where you don't want to be blinded by your sight.

Or one that cycles through Green for 1-5 and Blue for 6-11 I would jump on that in a heart beat! Is that a possibility? :drool:

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests